TOSR08-D - 8 Channel USB/Wireless Timer Relay Module Xbee Control Kit
Reward Points: 0
Availability: 998
20 or more $101.00
Kit include:
1x TOSR08-D 8 Channel USB/Wireless Timer Relay Module
2x Xbee S1 Wireless modules
1x Xbee USB adapter
1x Mini USB cable
Description:
This is a USB/Wireless Timer Relay Module, It allows computer control switching of external devices by using the USB port of your computer!
Meanwhile, It has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, which mean now you can control your device by zigbee or Bluetooth or WiFi !
The TOSR08-D module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.
It's also support delay timer function. You can set each relay output delay from 0 second - 24 hours.
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.
A full datasheet for the relays used on the TOSR08-D is here: G5LA datasheet
If you use DC Power ,the Input voltage should be DC5V.
First Step - Install the Driver
The TOSR08-D module uses FT232RL USB to UART chip . Before using the TOSR08-D you will need to download the FT232RL Driver.
Connect the TOSR08-D and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TOSR08-D will now appear as a com port.
Commands
The TOSR08-D operates with an easy to use command set as described in the table below.
TOSR08-D Baud rate : 9600
Test program
To get the TOSR08-D up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
Documents:
Controlling a TOSR0x USB Relay Module Using Python (Thanks James!)
iPhone APP (WIFI) Timing function is not supported
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
