ATMEGA328P-PU & crystal Kit

ATMEGA328P-PU & crystal Kit
Product Code: G4EBC798B2EF78
Reward Points: 0
Availability: 980
Price: $3.90

5 or more $3.70
20 or more $3.50
   - OR -   

Here we have an ATmega328 pre-loaded with the Arduino UNO(16MHz) Bootloader, Two 16Mhz crystal, and one 28 pin DIP Socket. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

To get this chip working with Arduino IDE, you will need the 16Mhz crystal included, and an external 5V supply, or you could use a usb to ttl converter to power the chip and upload your sketches (pictured below) just like you do with your arduino.


If you are not comfortable doing this, we recommend purchasing the Arduino UNO board (please see our other auctions for a cloned UNO for much cheaper than the arduino branded boards) that has all of this built into the board.

Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage! Note: This contains the bootloader used on the Arduino UNO.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2018