Arduino Due - Original

Arduino Due - Original
Arduino Due - Original Arduino Due - Original
Brand: Arduino
Product Code: G5195EB32F0537
Reward Points: 0
Availability: 14
Price: $55.00

5 or more $49.50
20 or more $48.00
   - OR -   

Description: Based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE ,the Due is Arduino's first ARM-based Arduino development board. It can increase the computing power available to Arduino users, keeping the language as compatible as possible so that many programs will be migrated in just a few minutes!

The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 4 UARTs (hardware serial ports),12 analog inputs, an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also other cool features like DACs, Audio, DMA , an experimental multi tasking library and more.

If you want to compile code for the ARM processor, you'll need the latest version of the Arduino IDE: v1.5 (After testing for a period of time and debugging this will replace the 1.0.1 IDE altogether)

Arduino shields based on the 5v models won't work properly, due to the limitations of system voltage imposed by the Atmel SAM3X8E. All the shields that fully implement the Arduino R3 layout are compatible straight away (like the Arduino WiFi shield and Ethernet Shield) but other shields might not be compatible. Be careful when you're plugging stuff in!

Note: Unlike other Arduino boards, the Arduino Due board runs at 3.3V which is the maximum voltage that the I/O pins can tolerate. Providing higher voltages, like 5V to an I/O pin could damage the board.

Features:

  • Microcontroller: AT91SAM3X8E
  • Operating Voltage: 3.3V
  • Recommended Input Voltage: 7-12V
  • Min-Max Input Voltage: 6-20V
  • Digital I/O Pins: 54 (of which 12 provide PWM output)
  • Analog Input Pins: 12
  • Analog Outputs Pins: 2
  • Total DC Output Current on all I/O lines: 130 mA
  • DC Current for 3.3V Pin: 800 mA
  • DC Current for 5V Pin: 800 mA
  • Flash Memory: 512 KB all available for the user applications
  • SRAM: 96 KB (two banks: 64KB and 32KB)
  • Clock Speed: 84 MHz

Documents:

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2017