TSTR04 - 4 Channel Outputs 4 Temperature Sensors USB Relay (Thermostats)

TSTR04 - 4 Channel Outputs 4 Temperature Sensors USB Relay (Thermostats)
TSTR04 - 4 Channel Outputs 4 Temperature Sensors USB Relay (Thermostats) TSTR04 - 4 Channel Outputs 4 Temperature Sensors USB Relay (Thermostats) TSTR04 - 4 Channel Outputs 4 Temperature Sensors USB Relay (Thermostats)
Product Code: G53E9A39C0B71C
Reward Points: 0
Availability: 245
Price: $36.00

5 or more $33.00
20 or more $30.00
   - OR -   

Description:

This is a TSTR04 USB relay board which has an OLED display and 4 temperature sensor ports. Very powerful and easy to use. In "Normal" mode, it allows computer to control switching of external devices by using the USB port of your computer. In "Auto" mode, you can set a threshold value to let the relay ON/OFF related with the temperature. So you can use it as a thermostat. It also has a wireless extension port which can works with Xbee or BluetoothBee or WiFibee Module, so you can control your device via zigbee or Bluetooth or WiFi!

The TSTR04 provides four volt free contact relay outputs with a current rating of up to 10Amp each. The TSTR04 module can be powered by USB bus or from a 5VDC power supply. The DC input jack is 2.1mm with positive core polarity. The relays are SPDT type. If you want to power it with DC12V or 24V, you just need a 12V/24V-5V DC converter.

Note: DS18B20 sensor is not included. You need to buy it separately.

Note: You must need a overheat protection device to avoid the risk of fire if you use it in any heating system.

 

Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

A full datasheet for the relays used on the TSTR04 is here: G5LA datasheet

If you use DC Power ,the Input voltage should be DC5V.

First Step - Install the Driver
The TSTR04 module uses FT232RL USB to UART chip . Before using the TSTR04 you will need to download the FT232RL Driver.

Connect the TSTR04 and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

The TSTR04 will now appear as a com port.

Commands
The TSTR04 operates with an easy to use command set as described in the table below.

TOSR04-T Baud rate : 9600 

Test program
To get the TSTR04 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.

 

Documents:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2018