3G/GPRS/GSM Shield for Arduino with GPS - European version SIM5320E

3G/GPRS/GSM Shield for Arduino with GPS - European version SIM5320E
3G/GPRS/GSM Shield for Arduino with GPS - European version SIM5320E 3G/GPRS/GSM Shield for Arduino with GPS - European version SIM5320E 3G/GPRS/GSM Shield for Arduino with GPS - European version SIM5320E 3G/GPRS/GSM Shield for Arduino with GPS - European version SIM5320E
Brand: Tinysine
Product Code: G5763B577535FD
Reward Points: 0
Availability: 1524
Price: $59.95

5 or more $55.00
20 or more $52.00
   - OR -   

 

The Tinysine 3G Cellular Shield provides you a way to use the 3G/GSM cell phone network to receive data from a remote location. This 3G shield has better coverage, GSM backwards-compatibility and even sports a built-in GPS module for geolocation & asset tracking. This all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project in a single shield.

 

3G/GPRS specifications:

  • Quad-band 850MHz GSM, 900MHz EGSM, 1800MHz DCS, 1900MHz PCs - connect onto any global GSM network with any 2G SIM.
  • This is the European Version - with dual-band UMTS/HSDPA 900/2100MHz WCDMA + HSDPA. For American version, Click here.
  • Fully-integrated GPS (Qualcomm PM8015 GPS) that can be controlled and query over the same serial port
  • Make and receive voice calls using a headset or an external 8Ω speaker + electret microphone
  • Send and receive SMS messages
  • Send and receive GPRS data (TCP/IP, HTTP, etc.)
  • AT command interface can be used with 300, 600, 1200, 4800, 9600, 19200, 38400, 57600, 115200, 230K, 461K, 961K, 3.2M, 3.7M and 4.0Mbps
  • Native USB support - plug it into a computer and you'll get serial ports for AT commands, GPS NMEA as well as a modem (note we've only tried out the AT&NMEA ports on Windows)

 

GPS specifications:

  • 16 acquisition channels
  • GPS L1 C/A code
  • Sensitivity
    Tracking: -157 dBm
    Cold starts : -144 dBm
  • Time-To-First-Fix
    Cold starts: 100s (typ.)
    Hot starts: 1s (typ.)
  • Accuracy: approx 2.5 meters

 

You may also need some required & recommended accessories to make this 3G shield work. These are not included!

  • SIM Card. A 2G or 3G Mini SIM card is required to do anything on the cellular network.
  • MicroUSB cable for charging the battery and communicating with the module over USB
  • External GPS Antenna (needs a uFL to SMA adapter too)

 

Document:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Tags: 3G, Arduino,
Powered By Tinyos
Tinysine (Tinyos) Electronics © 2017