L298N Motor Driver Board
Product Code: G4E72BD6A5FCB7
Reward Points: 0
Availability: 86
Reward Points: 0
Availability: 86
Price: $4.90
5 or more $4.30
20 or more $4.00
20 or more $4.00
|
The L298N driver module, using ST' L298N chip, can directly drive two 3-30V DC motor, and provide a 5V output interface, power for 5V single-chip circuitry , support 3.3VMCU control. you can easily control the DC motor speed and direction, also control the 2-phase stepper motor. It is essential for smart car.
  Driver: L298N Dual H Bridge DC Motor Driver IC Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V Driven part of the peak current Io: 2A The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V) The logical part of the operating current range: 0 ~ 36mA Control signal input voltage range: Low:-0.3V ≤ Vin ≤ 1.5V High: 2.3V ≤ Vin ≤ Vss Enable signal input voltage range: Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid) High: 2.3V ≤ Vin ≤ Vss (control signal active) Maximum power consumption: 20W (when the temperature T = 75 ℃) Storage temperature: -25 ℃ ~ +130 ℃ Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Related