Categories

Pro Micro Leonardo - 5V/16MHz

Pro Micro Leonardo - 5V/16MHz
Pro Micro Leonardo - 5V/16MHz Pro Micro Leonardo - 5V/16MHz Pro Micro Leonardo - 5V/16MHz
Product Code: G571B318209BF8
Reward Points: 0
Availability: Out Of Stock
Price: $8.80
   - OR -   

The Pro Micro Leonardo is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. It has Arduino Leonardo bootloader in it. So you can just use it like a normal Arduino Leonardo board.

This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

Features:

  • ATmega32U4 running at 5V/16MHz with Arduino Leonardo bootloader
  • On-Board micro-USB connector for programming
  • 4 x 10-bit ADC pins
  • 12 x Digital I/Os (5 are PWM capable)
  • Rx and Tx Hardware Serial Connections
  • Dimensions: 1.3x0.7"

Documents:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2024