Mini Push-Pull Solenoid - DC5V
Product Code: G6811B442C815F
Reward Points: 0
Availability: 200
Reward Points: 0
Availability: 200
Price: $4.50
5 or more $19.50
20 or more $17.00
20 or more $17.00
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the middle. When the coil is powered, the slug is pulled into the center of the coil. This makes the solenoid able to pull or push.
This solenoid is very small: with a 20mm long body and a captive armature with a return spring. This means that when activated with ~5VDC, the solenoid moves, and then the voltage is removed it springs back to the original position, which is quite handy.
Note: you will need a fairly good power supply to drive a solenoid, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 1 Amp, and don't power the solenoids all the time(<3 seconds)
Specifications：
- Working volatge: DC5V
- Current: 0.4A
- Throw: 4mm
- Length of Cable: 9cm
- Dimensions: 30x12x11mm
- Weight: 12g
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: