WizFi210 WIFI Module

WizFi210 WIFI Module
WizFi210 WIFI Module WizFi210 WIFI Module
Product Code: G4FAA3AE97DE2B
Reward Points: 0
Availability: 100
Price: $45.00
   - OR -   

The WizFi210 family of fully certified modules offers a quick, easy, and cost effective way for device and appliance manufacturers to add Wi-Fi capabilities to their products. The module provides serial UART  interface which enables connection to any embedded design utilizing an 8/16/32-bit microcontroller via simple commands. The WizFi210  is an  ideal solution for organizations with limited or no Wi-Fi or RF expertise, as it not only dramatically reduces RFdesign time but also removes the burden of testing and certification; allowing customers to focus on their core application, product, or expertise. The module supports data rates up to 11 Mbps, and is compliant with 802.11b.
The WizFi210 provides customers the mean to evaluate the capabilities of ultra-low power wireless system-on-a-chip and the Serial to Wi-Fi embedded software for Wi-Fi networks.The Serial to Wi-Fi embedded software allows devices and appliance manufacturers to easily ad Wi-Fi capabilities to their products with minor impact on the host microcontroller firmware.The WizFi210 provides all the hardware and software necessary  to quickly set up a serial (UART) based link to a PC or external microcontroller.  

  • Bring WiFi connectivity via Serial Host Interface, compatiable with Arduino
  • Quick Booting Time : under 20msec
  • Ultra Low Power through Dynamic Power Management (34µA at the Standby mode)
  • Operates with standard 802.11b/g/n access point at speed up to 11Mbps (802.11b)
  • Security Protocol : WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • Operation Temperature : -40℃ ~ 85℃
  • Compact Size : 32 x 23.5 x 2.9 (mm)
  • CE, FCC, KCC Certified
  • Supports the module with chip antenna
  • 802.11b/g/n


  • Wifi Chip: WizFi210
  • Radio Protocol: IEEE 802.11b/g/n Compatible
  • Supported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • Modulation: DSSS and CCK
  • RF Operating Frequency: 2.4 - 2.497 GHz
  • Antenna Options: Chip antenna and U.FL connector for external antenna
  • Networking Protocols: UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical): Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical): 8dBm ± 1dBm
  • Security Protocols: WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface: UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source: 3.3V
  • Dimensions(except Antenna): 59 x 54 mm



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Powered By Tinyos
Tinysine (Tinyos) Electronics © 2024