OLED Skin for PyBoard
20 or more $11.50
The OLED skin is a module that is fully compatible with the pyboard. It has a 0.91" 128x32 OLED module on it. pyboard fans can display some simple information by use this OLED skin.
The driver chip is SSD1306, communicates via I2C only. This board/chip uses I2C 7-bit address 0x3C. The OLED and driver require a 3.3V power supply and 3.3V logic levels for communication.The power requirements depend a little on how much of the display is lit but on average the display uses about 20mA from the 3.3V supply.
The pyboard is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash drive to save your Python scripts, and a serial Python prompt (a REPL) for instant programming. Requires a micro USB cable. Works with Windows, Mac and Linux.
Display details:
- Diagonal Screen Size：0.91"
- Number of Pixels：128 × 32
- Interface：I2C
- Drive IC: SSD1306
- Color Depth：Monochrome (White)
- Pixel Pitch (mm)：0.175 × 0.175
- Pixel Size (mm)：0.159 × 0.159
- Brightness ( cd/m2)：150 (Typ) @ 7.25V
Documents：
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
