Categories

2 x 100W Class D Bluetooth Audio Amplifier Board - TSA7499

2 x 100W Class D Bluetooth Audio Amplifier Board - TSA7499
2 x 100W Class D Bluetooth Audio Amplifier Board - TSA7499 2 x 100W Class D Bluetooth Audio Amplifier Board - TSA7499 2 x 100W Class D Bluetooth Audio Amplifier Board - TSA7499 2 x 100W Class D Bluetooth Audio Amplifier Board - TSA7499
Brand: Tinysine
Product Code: G5799C357677C5
Reward Points: 0
Availability: 491
Price: $43.50

5 or more $39.00
20 or more $35.00

Available Options


* Antenna Type:




   - OR -   

TSA7499 is designed for factory or DIY users. Bluetooth/LINE IN selects switch and audio input port designed as JST connectors. So, user can install this amplifier board in a box and connect an external switch and RCA/Mono plug to make their own audio amplifier. TSA7499 can also connect with our TSA1000 external audio volume control board. People can adjust the audio volume by rotating a real knob.

TSA7499 is a 2x100W audio amplifier board with AudioB plus Bluetooth module. It's integrated ST high performance TDA7498 which supports dual channel audio amplification. Both of channels are capable of outputting nominal power simultaneously and continuously. This board can be powered by any DC14V-39V* power supply. It has a smart cooling system, and the fan does not work in normal cases to reduce the noise. The fan only starts when the chip temperature is > 65°C.

It's perfect for your Hi-Fi application, the audio source can be cable input or Bluetooth. You may wish to pair with a mobile phone or a computer (etc). Power the amplifier board. Use your phone or PC (etc) to search for a new Bluetooth device. The module will appear as "BT Speaker". You don't need a PIN, pair it and then you can play music.

Basic connection

TSA7499 with TSA1000 exteranl volume control board

 

Note: We tested it. It also works well with 12VDC power. But we suggest using DC14V-39V power if possible.

Note: If you connect a TSA1000 with this amplifier board, the power input cannot be more than DC24V.

 

Specification:

Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of ST’s TDA7499 chip.

TA = 25 °C, fIN = 1 kHz sine wave, RL= 6Ω, VCC = 36V. (Unless otherwise stated)

Parameter

Condition

Min

Typ

Max

Supply Voltage (v)

-

14

36

40

Quiescent Current (mA)

FAN ON,STBY Disable

-

90

-

FAN ON,STBY Enable

-

50

-

FAN OFF,STBY Disable

-

40

 

FAN OFF,STBY Enable

 

10

 

Input Sensitivity (mV)

25.6dB

-

1356

-

31.6dB

696

35.1dB

460

37.6dB

341

Input Impedance (Kohm)

-

48

60

-

Gain (dB)

GAIN0 = L, GAIN1 = L

24.6

25.6

26.6

GAIN0 = L, GAIN1 = H

30.6

31.6

32.6

GAIN0 = H, GAIN1 = L

34.1

35.1

36.1

GAIN0 = H, GAIN1 = H

36.6

37.6

38.6

Output Power (W rms)

THD = 10%

-

100

-

Efficiency (%)

Both channels output rating power.

-

>90

-

Minimum Load (ohm)

-

-

6

-

Frequency Response (dB)

±3dB

20

-

22k

Operating Temperature (℃)

-

0

20

50

 

Features:

  • Size: 12cm x 8cm
  • Smart cooling system
  • Bluetooth 4.0
  • External audio volume knob supported
  • Working voltage: DC14V-39V(without TSA1000) DC14V-24V(with TSA1000)
  • Over/under voltage protection
  • Over current protection
  • Over temperature protection

 

Applications:

  • Personal computer
  • Background music system
  • Musical instrument amplifiers
  • Home DIY
  • Car audio

Documents:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2024