4G(LTE)/3G/GSM Shield for Arduino with GPS - SIM7600CE
20 or more $56.00
Tinysine 4G (LTE) Shield can receive data from remote locations using a low-power 4G(LTE)/3G/GSM mobile phone network.This 4G shield has better coverage and also has a GPS module for positioning and asset tracking. This all-in-one cellular phone module enables you to add location tracking, voice, text, SMS and data to your project.
The frequency bands that SIM7600CE-T 4G(LTE) Shield supports are LTE-TDD/ LTE-FDD/HSPA+/TD-SCDMA/EVDO and GSM/GPRS/EDGE. It also supports LTE-CAT4(with uplink rate 50 Mbps and downlink rate 150 Mbps). With stable performance, this small cost-effective expansion shield can realize SMS and data transmission in a pretty low power consumption.
4G/GPRS specifications:
- Dual-band 900MHz EGSM, 1800MHz DCS-connect onto any global GSM network with any 4G SIM.
- Make and receive voice calls using a headset with a microphone
- Send and receive SMS messages
- Send and receive GPRS data (TCP / IP, HTTP, etc.)
- LTE CAT4: Uplink up to 50Mbps, Downlink up to 150Mbps
- TD-SCDMA: Uplink up to 128Kbps, Downlink up to 384Kbps
- TD-HSDPA / HSUPA: Uplink up to 2.2 Mbps, Downlink up to 2.8 Mbps
- HSPA +: Uplink up to 5.76 Mbps, Downlink up to 42 Mbps
- UMTS: Uplink / Downlink up to 384Kbps
- CDMA2000 / EVDO: Uplink up to 1.8 Mbps, Downlink up to 3.1 Mbps
- EDGE: Uplink / Downlink up to 236.8Kbps
- GPRS: Uplink / Downlink up to 85.6Kbps
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / -159 dBm (Beidou)
- Cold starts: -148 dBm
- Time-To-First-Fix (open air): Cold starts: <35s, Hot starts: <1s
- Positioning accuracy (open area): 2.5m (CEP50)
- Acceptance type: 16 -channels, C / A code
- GLONASS frequency band: 1597.5 ~ 1605.8MHz
- Beidou frequency band: 1559.05 ~ 1563.14MHz
- Update frequency: Default 1 Hz
- GNSS data format: NMEA-0183
- Supported types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
- Support domain: CS and PS
You may also need some required & recommended accessories to make this 4G shield work. These are not included!
- SIM Card. A 4G Mini SIM card is required to do anything on the cellular network.
- MicroUSB cable for charging the battery and communicating with the module over USB
- External GPS Antenna (needs a uFL to SMA adapter too)
Document:
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
