2 x 50W SPDIF Coaxial+DSP Audio Amplifier Board - TSA7802C

2 x 50W SPDIF Coaxial+DSP Audio Amplifier Board - TSA7802C
2 x 50W SPDIF Coaxial+DSP Audio Amplifier Board - TSA7802C 2 x 50W SPDIF Coaxial+DSP Audio Amplifier Board - TSA7802C 2 x 50W SPDIF Coaxial+DSP Audio Amplifier Board - TSA7802C
Brand: Tinysine
Product Code: G64799C5ED59B3
Reward Points: 0
Availability: 500
Price: $45.95

5 or more $41.50
20 or more $39.00
   - OR -   

TSA7802C 2x50W 2 channels SPDIF+DSP digital amplifier board with a SPDIFBee receiver module. SPDIFBee convert the SPDIF signal to I2S signal and output to the ADAU1701 DSP chip. TSA7802C is a very flexible DSP/DAC/Amplifier combination board. It has perfect class-D architecture(Based on TPA3116D2) and 2 channels have 50W power output. All the channels are capable of outputting nominal power simultaneously and continuously. This board can be powered by any DC12V-24V power supply. It can be used to drive any 4Ω or 8Ω passive speakers.

It's a 2 channels amplifier board. It has a coaxial input connector on the board which can accept different sampling rates digital audio source, from 16bit 44.1KHz to 24bit 96KHz.

The main DSP chip on this amplifier board is ADAU1701. It has a default DSP program loaded. Customers can adjust the gain, bass, midrange and treble in the DSP program. It also have a debug port for Sigima Studio, User can program this module with our USBi programmer to get more functions which includes equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, etc.


External Buttons port:

Not support this function on TSA7802C.


Volume control POT port:

There have an Ext POT port on the board. You can connect external POTs (5K~20K) to control the Main volume,treble,middle,Bass. You need update the DSP program first. DSP program (with external POTs). This is our POT kit

  1. ADC0- Main volume.
  2. ADC1- Bass volume.
  3. ADC2- Middle volume.
  4. ADC3- treble volume.

DSP programming port:

User can load a new DSP program by using the USBi JTAG Sigma DSP programmer

The default DSP program can auto select the Line in /SPDIF audio and output to the amplifier chips. SPDIF audio signal has higher priority.




Specifications typical @ +25℃, Powered by 30V DC, unless otherwise noted. Specifications subject to change without notice.

Parameter Condition Min Typ Max

Supply Voltage (VDC)

- 12 21 24
Power output per channel RL= 4Ω, 10% THD+N   50W  
RL= 8Ω, 10% THD+N     30W
RL= 4Ω, 10% THD+N 18W    
THD+N @4Ω, 1W, 1KHz   0.03%  
Bandwidth @ ±3dB @4Ω 20Hz - 20KHz
Input Impedance - - 22KΩ -

Minimum Load Impedance




Gain   18dB 24dB 34dB
Efficiency 50W @ 4Ohm 87% - 92%



  • Size: 10.5cm x 7.5cm x 2.2cm
  • SPDIF Supported sampling rate:
  • 16bit, 44.1KHz, 48KHz, 88.2KHz, 96KHz
  • 24bit, 44.1KHz, 48KHz, 88.2KHz, 96KHz
  • I2S Sampling Rate: 48KHz, 16bit
  • 2 channels
  • Working voltage: DC12V-24V
  • Over/under voltage protection
  • Over current protection
  • Over temperature protection



  • Personal computer
  • Background music system
  • Musical instrument amplifiers
  • Home DIY
  • Car audio



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Powered By Tinyos
Tinysine (Tinyos) Electronics © 2024